LibraryEASYProcess Reference ManualWebPartsFieldsTextBox
KTextBox Use Examples



Set this field to True if you want to submit page in Ajax mode. In Ajax mode, page will be submitted asynchronously and user will not notice a page flicker.



This property is only used when the field is in a list section. If AllowSorting is set to ‘True’, then the list will display a sort option at the top of the field column in the lest. This sort option can be selected and the list will be sorted on that column. To make a field the default sorting option for a section set the sections property SortField to the field.


When the field has a Description, the text here displays in that description. Blank and spaces are accepted values for this property.

Whether a not a field has a description is determined by the section the field is in. Each section has a property called “Field Description” which has options to either not display a description (Field Description: No) or where it should be displayed in relation to the field (Field Description: left, right, top).


If this property is not blank, the text entered here is displayed in a message when the user hovers over the field.

Enabled, RenderIfNotVisible, Visible

Determines whether text in the textbox is able to be edited by users.


This is how many characters can be entered in the textbox. When the max input length is met, the user will be unable to type any additional characters into the text box.


When this property is set to true, the field cannot be selected and is only used for displaying data.


This property is where you can set the text to be displayed in the field when the page loads.


AutoCompleteAPI, AutoCompleteEnabled, AutoCompleteProcess, CompletionListCssClass, CompletionListHighlightedItemCssClass, CompletionListItemCssClass, ShowAutoComplete

This is where you can enter the API that is used to autocomplete the input text.

Basic Properties


Active is defaulted to true. When true the field gets added to the page and can be used. If false the field is not added to the page and its value can not be used. It is as good as deleted. Use this if you are not sure to delete the field.


IdMode determines the id that the field gets when it is put on the page.There are two options: Default and NameOnly. Default set the id to [FieldName]@[WebPartId]@[index]@[index]. NameOnly sets the id to [FieldName].



If the field is within a list section, the user has the ability to download the list section to a CSV file. This property controls which columns will be included in that file. Options are “Display Only”, “Download Only”,  and “Display and Download”. Display refers to the column appearing on the page and download refers to the column appearing in the file downloaded.



This parameter takes Button Name as an input and triggers button click when Enter Key is pressed within the textbox.


Name of a javascript function that will run when the field loses focus.


When True automatically posts the page when the value has been changed. Defaults to False


Name of a javascript function that will run when a key is released.



Translate can be set to ‘True’ or ‘False’ if set to ‘True’ when the language is switched from the default language the field contents will be translated. If set to ‘False’ it will not be translated.



There are two options. Modal/Inline which opens a windows inside the existing page. New windows which opens a new browser window.


This will open a pop-up window for quick Helper setup. It displays On if the Helper is active and Off if not.


The url or path for the image that will be displayed next to the field that indicates the helper.


The WebpartId of the webpart that will show in the helper.


Can be Calendar, Webpart, or Number.


Specify properties that the window that opens will have. For example width, height, scrollbar, etc.


The JavaScript onClick function name for the Helper. By default, the value is EP_OpenWebPartHelpWindow and it is pre-populated.


The page name of the pop-up or inline window for Helper. By default, the value is ~/WebPartHelp.aspx and pre-populated.



True or False if dates that are in the future are allowed.


True or False if dates that are in the past are allowed.


True or False if todays date is allowed


The dates that are disabled in a calendar helper, seperated by comma, so they won’t be able to be selected. Date must be in YYYY/MM/DD format.


True to not allow weekends and False to allow weekends.

Helper Parameter

HelpParameter1, HelpParameter10, HelpParameter2, HelpParameter3, HelpParameter4, HelpParameter5, HelpParameter6, HelpParameter7, HelpParameter8, HelpParameter9, HelpValue1, HelpValue10, HelpValue2, HelpValue3, HelpValue4, HelpValue5, HelpValue6, HelpValue7, HelpValue8, HelpValue9

Parameters that will be passed into the helper. HelpParameter is the name of the parameter that will be passed to the helper as a query string. HelpValue is the value of the parameter that is passed.


DescriptionHorizontalAlign, DescriptionVerticalAlign, FieldDescriptionHeight, FieldDescriptionWidth, Height, HorizontalAlign, tabindex, VerticalAlign, Width

The horizontal alignment of the field description is controlled by DescriptionHorizaontalAlign and can be set to left, center, or right

The vertical alignment of the field description is controlled by DescriptionVerticalAlign and can be set to top, middle, bottom, or baseline

The horizontal alignment of the field is controlled by HorizontalAlign and can be set to left, center, or right

The vertical alignment of the field is controlled by VerticalAlign and can be set to top, middle, bottom, or baseline

The height of the field description is controlled by FieldDescriptionHeight

The width of the field description is controlled by FieldDescriptionWidth

The height of the field is controlled by Height

Control the tab order by setting the Tabindex of each field.

The width of the field is controlled by Width

On Submit Progress

DisplayProgressAnimation, ProgressAnimationImage, ProgressAnimationText

Use these properties to show progress animation when you submit a form. This can be used for both ajax and non-ajax mode.

These properties are available for both webpart and field level. Field level properties will override webpart level.

DisplayProgressAnimation must be True for this to work.

If Progress animation url is left blank, it will use images/EP_Progress.gif by default.

Responsive Design


These two properties are used for adaptive design for phone display.

RWDAutoFormat : By default EASYProcess will does auto format for a control for adaptive design. For example, section NoOfColumns will always be set to 1 for phone display. By making RWDAutoFormat to false, you can stop such format from happening automatically. This property is only available at WebPart and Section level.
RWDVisibility : Its value can be All, Desktop, Phone. ‘All’ means this control will display in both desktop browser and phone. Desktop will force this control to display in desktop browser, Phone will force this control to display in phone browser. If value is blank, then it will default to ‘All’.


CellStyle, CssClass, FieldDescriptionStyle, SkinId, Style
  • SkinId : A skin is a predefined collection of classes for a particular control. Once a SkinId is specified for a control, a set of classes in that control will be automatically set. For example, Class in Label will be ‘Label-<SkinId>-Class’. Every control defaults to SkinId = ‘Default’. You can have multiple skins for a particular control but only one can be applied at a time. Values for these classes are specified using EASYProcess CSS feature. To understand how CSS and Skin Id works review document here.
  • Class : By making SkinId blank, you can use your own class name. Make sure you define class name in your own CSS or using EASYProcess CSS feature.
  • Style : Apply inline styling using this property. Any value specified here will be applied directly. You can use EASYProcess style builder to create style string.
  • DescriptionStyle : Use this property to style description of this control.
  • CellStyle : Use this property to style container cell for a control.
  • To style other elements in this control, which are children of this control, use CSS selectors for children.



This is the message that will be displayed when a date has an invalid format.


The validation group is a name given to the group of textboxes/inputs that are triggered by the same button. The validation group should match the validation group that is set in the button properties. When this button is selected, validation will run for all the inputs that match the button’s validation group.


This is the message that will be displayed when an input field fails validation.


Set to true if the textbox is meant to take a date.


This is the message that will be displayed when a required field is empty.


When set to True this makes the input required, which means that the form cannot be submitted until there is valid data entered into the input field.


This property takes regex logic and force the user to follow the specified regex format.


Options are None or inline. The inline option will display the validation message inline.

Powered by EASYProcess (© 2019 K-Rise Systems, Inc).